



















เครื่องอัดเศษวัสดุแนวตั้ง Bramidan รุ่น X25
- For various types of material – even expandable
- stop Large and wide chamber
- stop Retainers prevent in-chamber material expansion
- stop Short cycle time for fast clean up
- stop Moving parts are protected inside the machine
- stop Low overall height (<2 metres)
Bale weight cardboard (kg): 200-300
Bale weight plastic foil (kg): 250-350
Bale size WxDxH (mm): 1200 x 800 x 800
Press force (t): 25
Power supply: 3x400V 50Hz 16A
Motor (kW): 4.0
Noise Level (dB): 59-60
Cycle time avg. (sec): 23
Dimensions WxDxH (mm): 1745 x 1255 x 1995
Machine weight (kg): 1410
Feed opening WxH (mm): 1090 x 530
สินค้าที่เกี่ยวข้อง
-
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้ง Bramidan รุ่น X25 Galvanized
- Galvanized according to DS/EN 1461:2009
- stop Resistant surface
- stop No flakey paint
- stop Suitable to be placed outdoors
- stop Easy installation
- stop Low overall height (<2 metres)
Bale weight cardboard (kg): 200-300
Bale weight plastic foil (kg): 250-350
Bale size WxDxH (mm): 1200 x 800 x 800
Press force (t): 25
Power supply: 3x400V 50Hz 16A
Motor (kW): 4.0
Noise Level (dB): 59-60
Cycle time avg. (sec): 23
Dimensions WxDxH (mm): 1745 x 1255 x 1995
Machine weight (kg): 1410
Feed opening WxH (mm): 1090 x 530อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องเจาะและบดขวดพลาสติก HSM PET-Crusher รุ่น 1049SA
This HSM solution reduces the space requirement for returned containers to approx. 25 to 30 percent of the original volume, thus also reducing the time required for disposal. The special roller system perforates and crushes the containers. The sidewalls mesh into each other, making the reduction in volume permanent. Crushing has an additional advantage: deposit plastic bottles and cans are reliably invalidated.
- Container volume / collecting: 290 l
- Driving power: 3 kW
- Frequency: 50 Hz
- Working width: 490 mm
- Loading height: 1,206 mm
- Dimensions in mm: W 793 x H 2,037 x D 1,751
- Weight: 288 kg
- Industry type: Food & beverage industry, Retail
- Press material: PET, soft packaging
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้ง Bramidan รุ่น X50
- stop Efficient compaction of most types of materials
- stop High compression ratio – also of expandable materials
- stop Minimum material expansion between press cycles
- stop Flexible tying options with plastic straps or steel wire
- stop Short press cycle (28 secs)
- stop Easy access to electrical parts for repair and maintenance
- stop Moving parts are protected inside the machine
Bale weight cardboard (kg): 350-450
Bale weight plastic foil (kg): 400-500
Bale size WxDxH (mm): 1200 x 800 x 1100
Press force (t): 50
Power supply: 3x400V 50Hz 32A
Motor (kW): 5.5
Noise Level (dB): 71
Cycle time avg. (sec): 28
Dimensions WxDxH (mm): 1965 x 1385 x 2580
Machine weight (kg): 2590
Feed opening WxH (mm): 1090 x 610อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวนอน HSM รุ่น 8TE
In terms of performance, efficiency and flexibility our mobile HSM 8 TE small baler is hard to beat. This compact baling press is also extremely easy to operate: insert the strapping tape, switch it on and watch it go! Also the strapping and ejection of the bales can be performed easily. The complete bale ejection means that the compact bales are ejected by the machine directly onto a pallet and ca storage locationan be easily transported to .
- Pressing Power: 80 kN
- Auto Strapping: No
- Pressing Chamber Width: 1,050 mm
- Pressing Chamber Height: 505 mm
- Bale Size in mm: 645 W x 50,000 L x 505 H
- Hourly Bale Output: 4-7
- Driving Power: 400 V / 50 Hz (4 kW)
- Dimensions in mm: 2,520 W x 8,500 x 780 H
- Weight: 554 kg
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุพร้อมแยกของเหลว HSM รุ่น FluidEx 600
The HSM PET FluidEx 600 empties quickly and reliably those full PET bottles, carton based packaging containers and cans which have been filled or labelled incorrectly or where the sell-by date has been exceeded. The containers thrown in via the loading funnel are pulled in by the 4-roller mechanism and almost completely emptied. Small pieces of plastic and labels are removed from the liquid using a filter system and the liquid is then discharged using a dedicated system. The hinged loading funnel means that the machine can be easily cleaned. A high performance, low space requirement and the possibility to integrate the machine into existing recycling processes are the decisive advantages of the HSM PET FluidEx 600.
- Perforation of full PET bottles, carton based packaging containers and cans
- Containers emptied by up to 98 %
- Optimum removal of any remaining liquids using the 4 shaft technology
- Low space requirement
- Both manual and automatic filling possible
- Cutting unit made of specially hardened and ground steel
- Durable and robust – for a long life-cycle
- Intake shafts ensure that the PET bottles are fed reliably into the cutting unit
- Specific discharge system for liquids via hose or pump
- Easy to clean due to inspection flap
- Ideal as compliment to the HSM Baling presses
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้งแบบประตูบานพับ พร้อมที่ล็อคประตูแบบมือหมุน HSM รุ่น V-Press 860 eco
With a pressing power of 548 kN and employing low-noise and energy-saving technology, the HSM V-Press 860 is the most economical and ecological solution for your waste disposal.
Article Number: 000000000006148174
Pressing power: 548 kN
Loading aperture width: 1195 mm
Loading aperture height: 650 mm
Bale length: 1200 mm
Bale width: 780 mm
Bale height (up to): 1200 mm
Bale weight, depending on material (up to): 480 kg
Cycle time when idling vacío: 25 s
Driving power: 4 kW
Voltage: 400 V
Frequency: 50 Hz
Width x Height x Depth: 1797 x 2985 x 1070 mm
Weight: 1886 kg
Industry type: Industry and Manufacturing, Print and Packaging, Recycling & Disposal, Logistics and Distribution, Retail
Press material: Plastic film, Punch waste/residue, Clothing, Polystyrene, Big Bags, Mixed paper, Cardboardอ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวนอน HSM รุ่น 12 GIGANT
เป็นเครื่องอัดแนวนอนระดับเริ่มต้นที่ได้รับความนิยมอย่างกว้างขวางทนทานสูงและรองรับการอัดก้อนหลากหลายรูปแบบ เหมาะสำหรับการจัดการแพคเกจจิ้งกระดาษ ฟิล์มพลาสติก หรือวัสดุอื่นๆที่ต้องการอัดก้อนในจำนวนมากๆ ด้วยช่องใส่วัสดุที่ใหญ่ช่วยทำให้การทำงานนั้นรวดเร็วและง่ายต่อการใส่วัสดุที่จะทำการอัดก้อน ผลที่ได้หลังจากการอัดก้อนนั่นคือทำให้เคลื่อนย้ายได้สะดวกและประหยัดพื้นที่ในการจัดเก็บ
- มีล้อสำหรับเคลื่อนย้ายไปตามจุดต่างๆในโรงงานได้อย่างง่ายดาย
- ระบบดีดก้อนอัดออกอัตโนมัติ
- ติดตั้งและใช้งานได้ทันที
- ระบบ Safety ป้องกันการเกิดอุบัติเหตุกับผู้ใช้งาน
- น้ำหนักก้อนอัดสูงสุด 150 กิโลกรัม
- ผลิตในเยอรมนีทุกขั้นตอน และพร้อมการดูแลหลังการขายโดยบริษัท ครีเอตุสคอร์โปเรชั่น จำกัด พร้อมมาตรฐาน ISO 9001:2008
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้ง HSM รุ่น V-Press 504
- สามารถอัดก้อนได้สูงสุด 50 กิโลกรัม
- ขนาดเล็กกระทัดรัด สามารถเสียบปลั๊กและใช้งานได้ทันที
- ควบคุมด้วยระบบ Micro Processor และ Membrane Keypad พร้อมหน้าจอแสดงผลการทำงาน LED
- ระบบ Safety ป้องกันการเกิดอุบัติเหตุกับผู้ใช้งาน
- สามารถตั้งโปรแกรมในการอัดได้ เช่นการอัดกล่องกระดาษ หรือการอัด Foil เป็นต้น
- หลังจากมีการอัดก้อนแล้ว สามารถนำก้อนออกจากเครื่องได้อย่างง่ายดายโดยใช้รถเข็น
- ระบบ Torsion Control System ป้องกันการป้อนวัสดุเกินในฝั่งใดฝั่งหนึ่งของเครื่อง เพื่อป้องกันการเสื่อมของท่อไฮดรอลิค
- ผลิตในเยอรมนีทุกขั้นตอน และพร้อมการดูแลหลังการขายโดยบริษัท ครีเอตุส คอร์โปเรชั่น จำกัด พร้อมมาตรฐาน ISO 9001:2008
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้ง Bramidan รุ่น B4
The Bramidan B4 baler is a machine which has been constructed to service users with smaller amounts of waste, but who still need a machine to handle bulky materials.
The chamber is equipped with rows of efficient barbs, which keep the material back and ensure optimum filling.
Bale weight cardboard (kg): 40-60
Bale weight plastic foil (kg): 50-70
Bale size WxDxH (mm): 770 x 500 x 600
Press force (t): 4
Power supply: 1x230V 50Hz 10A
Motor (kW): 1.5
Noise Level (dB): 57-60
Cycle time avg. (sec): 28
Dimensions WxDxH (mm): 975 x 715 x 1985
Machine weight (kg): 300
Feed opening WxH (mm): 770 x 460อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View -
อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View
เครื่องอัดเศษวัสดุแนวตั้ง Bramidan รุ่น X30
- Compacts very bulky material
- stop For most materials
- stop Retainers prevent compacted material from raising in the chamber
- stop Optimal compaction no matter the material
Bale weight cardboard (kg): 280-350
Bale weight plastic foil (kg): 350-450
Bale size WxDxH (mm): 1200 x 800 x 1000
Press force (t): 30
Power supply: 3x400V 50Hz 16A
Motor (kW): 4.0
Noise Level (dB): 59-60
Cycle time avg. (sec): 25
Dimensions WxDxH (mm): 1745 x 1255 x 2295
Machine weight (kg): 1710
Feed opening WxH (mm): 1090 x 655อ่านเพิ่มเติมProduct added! Browse WishlistThe product is already in the wishlist! Browse WishlistQuick View